위더스케미칼
Product
Packing Machine
Shrink packing machine (combined)
Packing Machine
WDS-4556 AL+WDS-5030
Specification
- Model
- WDS-5030
- Appearance specification
- 1672(L) X 770(W) X 1560(H)
- Tunnel Internal Specification
- 1300(L) X 500(W) X 300(H)
- Conveyor speed
- Minute/0-15M
- Power Usage
- Three phase(3PH) 380V / 12KW
- Equipment weight
- 360kg
Specification
- Model
- WDS-4556 AL
- Appearance specification
- 1800(L) X 800(W) X 1600(H)
- Maximum Adhesion Specification
- 450(W) X 560(L)
- Maximum Adhesion Specification
- (L + H) 500mm Less than
(W + H) 430mm Less than
(H) 150mm Less than
- Production speed
- Minute/25-30 packs (Varying according to product specifications)
- Power Usage
- Single phase(1PH) 220V / 2.5KW
- Air pressure used
- 5kg/㎠
- Equipment weight
- 500kg
Characteristics
Hot air generated from top, bottom, left and right side (including bottom of the conveyor) of inside of tunnel
Inside tunnel hot air temperature control function
Conveyor speed adjusting function (AC motor control)
High durability of conveyor chain and roller
Powerful air flow with 2 hot air motor and low temperature shrink is available
Safety accident can be prevented by installing the hot air motor inside of the equipment
Auto turn-off function after the operation is completed
Height adjustable seat and transporting wheels are attached which make it easy to install at site and during production
Characteristics
Various products packing is available
Uniform production of the products can be accomplished with precise machining of the components
Smooth production can be accomplished even when the frequent change of products with stable PLC program
Cutting knife can be replaced easily (separate type heater and knife / processing after Teflon coating treatment)
Stable film forming can be accomplished and electrostatic can be minimized using precisely machined film forming former and coating
Standardized components are used and maintenance of the equipment is easy
Easy to convert the packing between the single and bundle products by applying the stable product detecting sensors (front, back, upper and lower position)
Stable perforation can be accomplished all the time and the amount of perforation can be adjusted by applying independent adjustable perforating device
Safety accident can be prevented and damages of the product can be prevented by applying firm safety sensor on the sealing knife
Standardized mass production system reduces the facility investments